How do I set up the Savox RSM-30

Android Set-up

1. Set the Savox RSM-30 to the standard mode: when the RSM-30 is
not connected pressing the Vol - and the multi-function button until
you hear one single beep. The device will stay in this mode until you
change it.

2. Connect the RSM-30 to your mobile phone.

3. Open Zello.

4. Select Menu > Options > Push-to-talk button> Select push-to-talk button (press the button on your RSM) > Enable the "Handle headset buttons when in the background".

Screenshot_2014-12-02-10-46-17.png

5. Go back to a user and press the button on the RSM to test. 

iOS Set-up

1. Set the Savox RSM-30 to the standard mode: when the RSM-30 is
not connected pressing the Vol - and the multi-function button until
you hear one single beep. The device will stay in this mode until you
change it.

2. Connect the RSM-30 to your mobile phone.

3. Open Zello.

4. Select Menu > Settings > Push-To-Talk button > Enable
"Headset/remote control".

IMG_3559__1_.jpg

5. Exit the Zello, and then open again to start using the RSM-30.

Tip:

If you are using an iPod, the RSM-30 may shut down automatically when Zello is in the background. Set your RSM to self-powering mode to prevent it from shutting down.

1. Unplug from device.
2. Press MTF button (button on the front) for about ten seconds.
3. You'll hear one set of tones that tell you the battery status.
4. The second set of tones puts the device in self powering mode.

Watch this video to listen to the tones:  http://youtu.be/dwkMLWAZ04o.

Questions? Email support@zello.com.

Have more questions? Submit a request

2 Comments

Article is closed for comments.